Mindray BeneView T5 Quick Guide

Using a CF Storage Card
To insert a CF storage card, open the compartment and insert the card until the button ips out.
To remove the CF storage card:
In the main menu, select [Unload CF Storage Card], or [Patient Data]→[Unload CF Storage Card].
Select [Ok] from the popup menu to unload the CF storage card. A status message shown in the prompt message area will
report completion of the unloading.
Press the button until the CF storage card ips out.
To browse the data saved in the CF storage card, follow this procedure:
Select [Main Menu]→[Patient Data >>]→[History Data >>].
Select a patient you want to view from the [Patient Data List] and then select [Review].
Select [Data Review].
1.
2.
3.
1.
2.
3.
Note
:
Data may be unable to be saved into the CF storage card when the patient monitor is just turned on.
If no CF stroage card is used, all the data you have saved will get lost in case of monitor shut-down or sudden power interrupt.
To avoid electrostatic charges, do not come into contact with the CF storage card when the patient monitor is on.
Unload the CF storage card before removing it from the patient monitor. Otherwise it may cause damage to the data in the
card.
Use only the CF storage card specied by Mindray.




14

Mindray BeneView T5 Specifications

General

Brand	Mindray
Model	BeneView T5
Category	Heart Rate Monitor
Language	English