Minelab F3 Service Manual

F3 Service Manual
Page 46
 Ensure the O-Ring is clean, lightly greased and in the correct position, next to
the speaker.
 Gently push the upper half of the pod down towards the handle until both halves
of the pod are correctly mated.
 Refit the five (or three depending on speaker pod version) screws (Part 5) which
hold the pod halves together.
 Refit sensitivity endcap and battery pack.

Minelab F3 Specifications

General

Brand	Minelab
Model	F3
Category	Metal Detector
Language	English