Minelab F3Ci User Manual

12
F3Ci Operations Manual
NOTE
The Earset Connector is waterproof and must be connected and
disconnected from the Earset Socket by holding the rubber collar.
Do not attempt to connect or disconnect the Earset by pushing or
pulling on the strain relief or wire at the rear of the rubber collar.
The F3Ci is now ready for use. Refer to Chapter 3 for Functional
Description, and Chapter 4 for Operating Procedures.
To repack the F3Ci, this preparation procedure should be reversed.

Minelab F3Ci Specifications

General

Brand	Minelab
Model	F3Ci
Category	Metal Detector
Language	English