18
CONTENTS
DISCLAIMER
The Minelab metal detector described in this instruction manual has been expressly designed and manufactured as a quality
metal detector and is recommended for treasure and gold detecting in non-hazardous environments. This metal detector has not
been designed for use as a mine detector or as a live munitions detection tool.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by
Minelab is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm
Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International,
Ltd., registered in the United States and other countries.
This work is licensed under the Creative Commons Attribution-
NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND
4.0) International License. To view a copy of this license, visit:
http://creativecommons.org/licenses/by-nc-nd/4.0/
Detector Care and Safety
Wash your hands before handling the detector after applying sunscreen or insect repellents.
Do not use solvents to clean. Use a damp cloth with a mild soap detergent.
Never allow the detector to come into contact with gasoline/petrol or other petroleum-based liquids.
Avoid getting sand and grit in the shafts and fastenings (e.g. coil yoke assembly and twist locks). If sand and grit
accumulates in these parts they should be wiped clean with a damp cloth.
Do not bring the detector or accessories into contact with sharp objects as this may cause scratches and damage.
Do not leave the detector in excessive cold or heat longer than necessary. Covering it when not in use will help protect it.
Avoid leaving it in a hot vehicle.
Ensure the coil cable is in good condition and not subject to undue stress.
Take precautions when transporting or storing the detector. Although the detector is constructed from the highest
quality materials and has undergone rigorous durability tests, the display screen could be prone to scratching or serious
damage if not treated with due care.
Do not expose the detector to extreme temperature conditions.
Storage temperature range is from −20°C to +50°C (−4°F to +122°F).
Detector operating temperature range is from −10°C to +50°C (+14°F to +122°F).
Do not submerge the detector body in water — it is rain-proof only.
All GPX 6000 coils are waterproof to 1 metre (3.3 feet), however care must be taken to ensure the coil connector
is not submerged.
Do not expose the ML 100 headphones or charging accessories to liquid/moisture or excessive humidity.
Do not allow children to play with the detector or accessories, small parts are a choking hazard.
Only charge rechargeable batteries and accessories according to the instructions provided.
Avoid charging rechargeable batteries and accessories in extreme temperature conditions.
Remove battery prior to air transportation.
To Next Page
Loading...
Need help?
General
