▷ Parking lights: turn the bulb holder, ar‐
row 1, counterclockwise and remove.
▷ Daytime running lights: squeeze the
upper and lower locks of the bulb
holder, arrow 2, and remove the bulb
holder.
For better accessibility, remove the bulb
of the fog light as needed.
▷ Fog lights: turn the bulb holder, ar‐
row 3, counterclockwise and remove.
5. Pull the bulb out of the fixture.
6. Insert the new bulb and install the cover in
the reverse order.
The daytime running lights bulb holder en‐
gages audibly, first below, then above.
LED front lights, bulb replacement
General information
The following lights feature LED technology:
▷ Daytime running lights
▷ High beams
▷ Low beams
▷ Parking lights
▷ Fog lights
In the case of a malfunction, contact a dealer’s
service center or another qualified service cen‐
ter or repair shop.
Overview
Position of the headlights
1 Daytime running lights
2 Low beams/high beams
3 Turn signal
LED bug light
1 Parking lights
2 Fog lights
Turn signal
Follow the general instructions on lights and
bulbs, refer to page 234.
Bulbs: PW24W
Seite 237
Replacing components
MOBILITY
237
Online Edition for Part no. 01402983336 - X/17
To Next Page
Loading...
Need help?
General
