With white turn signal lights: PWY24W
1. Turn the steering wheel.
2. Turn the lid counterclockwise, arrow 1, and
remove.
3. Unscrew the inner cover counterclockwise,
and remove it.
4. Pull bulb holder out of the bulb housing; if
needed, loosen it with small tilting move‐
ments if possible.
5. Pull the bulb out of the fixture.
6. Insert the new bulb and install the cover in
the reverse order.
Tail lights, bulb replacement
Overview
Vehicles with a rear fog light
1 Side tail lights
2 Rear fog light
3 License plate light
4 Center brake light
Vehicle with two rear fog lights
1 Side tail lights
2 Rear fog lights
3 License plate light
4 Center brake light
Seite 238
MOBILITY
Replacing components
238
Online Edition for Part no. 01402983336 - X/17
To Next Page
Loading...
Need help?
General
