| 23 |
The following instructions are about the cleaning of washer parts for long-term sanitary use.
Can freezing cause the washer to malfunction?
A small amount of water remains in the inlet hose or drum tub after the completion of
washing cycle. The water may freez at low temperatures. Follow the following instructions
in such an event.
- Wrap the inlet hose connection with a hot towel.
- Turn off the tap and detach the inlet hose. Then, put the hose in hot water (less than 50℃).
- Add 2ℓ of hot water (less than 50℃) into the tub and then wait for about 10 minutes.
- Reconnect the inlet hose and then turn on the tap to check the water supply and drainage.
- Do not take the above measure when the inlet hose is frozen as it may cause malfunctions.
Caution
How can I change the laundry setting while the washer is running?
There are available and unavailable options.
- You can change the wash, rinse, and spin cycles before the completion of the entire wash cycle.
- Press the Start/Pause button to change your setting.
How can I clean the inside of drum tub?
Cleanse the drum tub with washer Drum Cleaners available for retail sales.
- Use the cleaner correctly as instructed in user manual.
- Follow the following instructions to clean the drum tub.
1. Add washer Drum Cleaners to the detergent container.
2. Select the Drum Clean Course.
3. Press the Start/Pause button to start the Drum Clean cycle.
Q&A on Laundry
미니_DWD-M221MB(영)_호주향_1도.indd 23 2017-07-04 오후 4:46:34
To Next Page
Loading...
General