13
OVERVIEWPLAYING RECEPTION SETTINGSINDEX
ADJUSTING THE SOUND QUALITY
Sound and tone playback
You can choose from the following sound
settings:
>
Bass:
Amplify or reduce bass tones.
>
Treble:
Amplify or reduce higher tones.
>
Front/back volume distribution (Fader):
Front or rear, louder/softer
>
Right/left volume distribution (Balance):
Right or left louder/softer.
>
Harman Kardon
*
Various sound patterns, refer to page 14.
The sound setting for bass, treble and
Harman Kardon is source-depen-
dent, i.e. can be adjusted separately for the
radio, CD changer and CD. Changing the
audio source will call up the last sound
setting used for this particular audio
source.
The sound setting of the front/rear and
right/left volume distribution applies to all
audio sources.
<
Changing the sound quality
1. Call up the sound setting
The display changes to the operating
display for BASS, e.g.:
2. Select a different sound setting (Treble,
Fader or Balance) if necessary
Press repeatedly until the desired oper-
ating display is reached
3. Change the desired sound setting
Turn until the desired setting is reached
4. Exit operating display
Resetting the sound settings
With TONE LIN (Tone Linear) you reset all
sound setting to the midrange setting.
Bass, treble and Harman Kardon are
reset for the current audio source,
and the front/rear and right/left volume
distribution is reset for all audio sources.
<
1. Call up the operating display for the
midrange setting
Press and hold the key.
The display changes to the operating
display for TONE LIN
2.
All settings are reset.
Online Edition for Part No. 01 41 0 156 490 - © 11/01 BMW AG
To Next Page
Loading...
Need help?
General
