Mitsubishi Heavy Industries HSB100 Technical Manual

■
This TECHNICAL MANUAL is for indoor units, HMA series or HSB series.
If indoor unit is not HMA series or HSB series, please refer to Manual No. ’13
•
HM-T-193 or
’18
•
HM-T-274.
■
If accessories are installed, please refer to each manual or Manual No. ’18
•
HM-T-274.
■
Regarding instruction manual, please refer to the below site.
http://www.mhi-mth.co.jp/en/
◦
Compatibility
Compatibility with previous models
The new remote controller has added a new software version compatible with new indoor units. making it also compatible with the
old models.
Due to specifications upgrade the old controller is not compatible with the new indoor units as shown in the table below:
RC-HY20
RC-HY40
HSB 60
○
○
Indoor unit
Remote
controller
RC-HY20-W
RC-HY40-W
○
○
HSB 60-W
○
○
HSB 100
○
○
○
○
×
×
HSB 140
○
○
○
○
HMK60
○
○
○
○
HMK100
○
○
○
○
The new indoor unit HSB60-W replaces the HSB60. This unit was upgraded in order to be compatible with R410A and R32
outdoor units.
Outdoor unit FDCW60VNX-A has the following compatibility:
FDCW60VNX-A
HSB 60
Indoor unit
Outdoor
unit
HSB 60-W
○ ○
HMK60
○
HMA60-S
○

Mitsubishi Heavy Industries HSB100 Specifications

General

Brand	Mitsubishi Heavy Industries
Model	HSB100
Category	Heat Pump
Language	English