-
47
-
Thick line : Rapid movement
Thin line : Slow movement
Stops for approximately
5 seconds in the
horizontal position.
Stops for approximately
5 seconds in this
position.
Thick line : Rapid movement
Thin line : Slow movement
Thick line : moves quickly
Thin line : moves slowly
Stops at this position
for 5 seconds.
Thick line : moves quickly
Thin line : moves slowly
Stops at this position
for 5 seconds.
EXTERNAL INPUT
WIRED REMOCON
OPE PERMISSION
CUSTOM
AUTO RESTART
LO TEMP
DIRT PREVENT
COOL ONLY
HI CEIL
PANEL
50/60
4.4 Power blackout auto restart function
(1) Power blackout auto restart function is that records the operational status of the air-conditioner immediately prior to it being
switched off by a power cut, and then automatically resumes operations at that point after the power has been restored.
(2) The following settings will be cancelled:
(a) Timer settings
(b) High-power operations
Notes (1) Power blackout auto restart function is set at on when the air-conditioner is shipped from the factory. Consult with your dealer if this function needs to
be switched off.
(2) When power failure ocurrs, the timer setting is cancelled. Once power is resumed, reset the timer.
(3) If the jumper wire (J7) “REMOTE/AUTORESTART(SKM), AUTORESTART (STM, SRRM)” is cut, auto restart is disabled. (See the diagram at above)
¡ SKM model
4.5 Flap control (SKM, STM only)
Control the flap by AIRFLOW button on the wireless remote control.
(1) Air scroll
The flap will be automatically set to the angle of air flow best to operation.
(a) Starting time of operation
(b) When not operating
The flap closes, when operation has stopped.
s
During cooling and
t
dry operation
s
During heating
t
operation
¡ STM, SRRM model
¡ SKM model
¡ STM model
s
During cooling and
t
dry operation
s
During heating
t
operation
To Next Page
Loading...
Need help?
General
