–9–
■ If this is pressed while the unit is off
SLEEP operation starts with the previous operation settings, and the air conditioning is
turned off after the time that has been set passes.
■ If this is pressed while the unit is running
Each time the button is pressed, the indication changes as follows:
Example: You wish it to stop after 7 hours.
Set to
The timer light (yellow) is on.
h
• The unit stops at the end of the set period of time.
SLEEP operation procedure
■ The unit stops automatically at the end of the set period of time.
The room temperature is automatically controlled when the set time lapses, so that the room does not become too cold during cooling or too warm
during heating.
Page 11
Press the SLEEP button.
1
Releasing procedure
Press the CANCEL button to turn off the SLEEP indicator.
Changing of set time
Set to a new time by using SLEEP button.
•
SLEEP operation will not function during ALLERGEN CLEAR operation.
•
Cannot be set at the same time as OFF-TIMER.
NOTE
OFF-TIMER operation procedure
■
The unit stops automatically at the end of the set period of time. If it is stopped, perform the operations starting with STEP 1 and if running start with STEP 2.
Example: You wish it to stop 22:30.
Press the ON/OFF button.
Press the OFF TIMER button.
OFF TIMER indicator is blinking.
Press the “ or ” button.
Each time the button is pressed, the indicator is switched in the order of:
0:00 0:10 0:20
...
(Units of ten minutes)
1:00 1:10
Each time the button is pressed, the indicator is switched in the order of:
0:00 23:50 23:40
...
(Units of ten minutes)
23:00 22:50
Set at 22:30.
3
1
4
Press the OFF TIMER button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
h
• The unit stops at the end of the set period of time.
2
Press within
60 sec.!
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
•
The present time is not displayed during OFF-TIMER operation.
•
OFF-TIMER operation will not function during ALLERGEN CLEAR operation.
•
Unlike SLEEP operation, automatic temperature adjustment is impossible during
OFF-TIMER operation.
Changing of set time
Set a new time by using the OFF TIMER button.
NOTE
RKX012A015_En.p65 5/22/06, 4:48 PM9
Black
To Next Page
Loading...
Need help?
General
