9
TECHNOLOGY
Multi Information Display SwitchKeyless Entry System
Start/Stop Engine Switch (if equipped with F.A.S.T.-key)
F.A.S.T.-Key
Normal Key
1. LOCK ( ) button
2. UNLOCK (
) button
3. Power liftgate button
(if equipped)
4. PANIC button
5. Operation indicator light
If the F.A.S.T.-key is not operating properly
Insert the F.A.S.T.-key into the key slot in the instrument panel.
Starting the engine and changing the operation mode should be
now possible. Remove the F.A.S.T.-key from the key slot after
starting the engine or changing the operation mode.
Each time the multi information display
switch is operated, the buzzer sounds and
the multi information display changes
between information such as warnings,
trip odometer, average and momentary fuel
consumption, distance range, etc.
While carrying the F.A.S.T.-key, press
the driver’s or front passenger’s door
lock/unlock switch A .
A
While carrying the F.A.S.T.-key within the operating range, the Start/Stop button can be used to start the engine.
• Move the selector lever in “P” position and hold the brake pedal down, push the Start/Stop button.
• To stop the engine, stop the vehicle completely and move the selector lever in “P” then press the Start/Stop button.
* If you have to bring the engine to an emergency stop while driving, press and hold the Start/Stop button for 3
seconds or more, or press it quickly 3 times or more.
• If you press the Start/Stop button without depressing the brake pedal, you can change the operation mode in the
order of OFF, ACC, ON, OFF.
• If the engine cannot be started or the operation mode cannot be changed, check the position of the F.A.S.T.-key or
the battery performance of the F.A.S.T.-key.
To Next Page
Loading...
Need help?
General
