When the blower speed selection dial is set to the
“0” position, all fan-driven airflow will stop.
Temperature control dial
E00700900300
The temperature control dial is used to adjust the
air temperature.
Turn it clockwise to increase the temperature and
anticlockwise to reduce the temperature.
NOTE
l
While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial.
Mode selection dial
E00701100325
To change the amount of air flowing from the ven-
tilators, turn the mode selection dial. (Refer to
“Changing the mode selection” on page 5-02.)
Air selection switch
E00701300662
To change the air selection, simply press the air se-
lection switch.
l
Outside air {Indication lamp (A) is OFF}
Outside air is introduced into the passenger
compartment.
l
Recirculated air {Indication lamp (A) is ON}
Air is recirculated inside the passenger com-
partment.
CAUTION
l
Normally, use the outside position to keep
the windscreen and side windows clear
and quickly remove fog or frost from the
windscreen.
If the outside air is dusty or otherwise con-
taminated use the recirculation position.
Switch to the outside position periodically
to increase ventilation so that the win-
dows do not become fogged up.
l
Use of the recirculation position for exten-
ded time may cause the windows to fog up.
NOTE
l
Even if the recirculation position is being
used before the engine is stopped, outside air
will automatically be selected following the
next engine startup.
For pleasant driving
5-05
5
To Next Page
Loading...
Need help?
General
