FOREWORD
This service manual is a guide to servicing the 1-ton to 3-ton internal combustion cushion models
of Mitsubishi Forklift Trucks. The instructions are grouped by systems to serve the convenience
of your ready reference.
Long productive life of your forklift trucks depends to a great extent on correct servicing – the
servicing consistent with what you will learn from this service manual. We hope you read the
respective sections of this manual carefully and know all the components you will work on before
attempting to start a test, repair or rebuild job.
The descriptions, illustrations and specifications contained in this manual were of the trucks of
serial numbers in effect at the time it was approved for printing. Mitsubishi reserves the right
to change specifications or design without notice and without incurring obligation.
For the items pertaining to the engines, refer to the following service manuals:
• 4G63/4G64 Gasoline Engine Service Manual (Pub. No. 99729-74120)
For use with both gasoline and LP Gas engines.
• 4G63/4G64 LP Gas Supplement (Pub. No. 99729-75100)
For use with LP Gas units with a “D” in the chassis serial number.
• 4G63/4G64 LP Gas Supplement (Pub. No. 99729-75110)
For use with LP Gas units with an “E” in the chassis serial number.
Safety Related Signs
The following safety related signs are used in this service
manual to emphasize important and critical instructions:
Indicates a specific potential hazard
resulting in serious bodily injury or
death.
Indicates a specific potential hazard
resulting in bodily injury, or damage
to, or destruction of, the machine.
Indicates a condition that can cause
damage to, or shorten service life of, the
machine.
Pub. No. 99719-70150
To Next Page
Loading...
Need help?
General
