3-91 RT ToolBox2/RT ToolBox2 mini
3 Controller
(10) RT ToolBox2/RT ToolBox2 mini
■ Order type ： ● RT ToolBox2
*For windows CD-ROM : 3D-11C-WINE
●
RT ToolBox2 mini
*For windows CD-ROM : 3D-12C-WINE
■ Outline
This is handy software that fully uses the personal computer functions. It can be used in
various stages from the robot specifications study (tact study, etc.) to the design support
(creation and editing of programs), start up support (execution, control and debugging of
program), and maintenance
The "personal computer support software" which supports these function fully, and the
"personal computer support software mini" which does not have the simulation function
are available.
■ Configuration
Table 3-39 ： Product configuration
■Features
(1) Simple operation with guidance method and menu method
The Windows standard is used for windows operation, so the controller initialization and startup operations
can be carried out easily by following the instructions given on the screen. Even a beginner can easily carry
out the series of operations from program creation to execution.
(2) Increased work efficiency with ample support functions
The work efficiency is greatly improved with the multi-window method that carries out multiple steps and dis
-
plays in parallel. The renumbering function, and copy, search, syntax check and step execution are especially
sufficient, and are extremely useful when editing or debugging the program.
With the simulation function support, the program can be debugged and the tact checked before starting the
machine at the site. This allows the on-site startup work efficiently to be greatly improved.
Part name Type Medium
Mass(kg)
Note1)
Note1) Mass indicates one set.
Remarks
RT ToolBox2 3D-11C-WINE CD-ROM 0.2
RT ToolBox2 mini 3D-12C-WINE CD-ROM 0.2
To Next Page
Loading...
Need help?
General
