3 Controller
Extension memory cassette 3-90
(9) Extension memory cassette
■Order type:●2D-TZ454
■ Outline
Used to increase the total number of teaching points in the robot program.
■ Configuration
Table 3-37 ： Configuration device
■ Specifications
Table 3-38 ： Specifications
［CAUTION］
･ Inserting and removing the memory cassette
A memory cassette cannot be inserted or removed while the control power is on. Please turn off the control
power before handling the memory cassette to avoid destroying the memory information in the cassette.
Part name Type Qty.
Mass(kg)
Note1)
Note1) Mass indicates one set.
Remarks
Extension memory cassette 2D-TZ454 1 0.1
Items Specifications Remarks
External dimensions Approx. 94(W)X65(D)X15(H) mm Excluding the connection connector
Mass Approx. 0.2 kg
Connection method Connection using a special connector
Memory size
Note1)
Note1) As for the standard points, after adding an expansion memory cassette, the information in all backup
memory areas in the controller is copied into the expansion memory cassette. Therefore, please note that
if the expansion memory cassette is removed after it has been added, there will be no program left in the
controller.
Teaching point number: 37,800
Steps number: 75,600
Program number: 256
The sum total value combined with the standard are
Teaching point number: 50,800
Steps number: 101,600
Program number: 512
Backup Backup using the controller's internal battery
To Next Page
Loading...
Need help?
General
