Mitsubishi MELSEC A1S63P User Manual

!PROGRAMMING -1
OR is a normally open contact parallel connection instruction and OR1 is the normally
closed contact parallel connection instruction. They use the
ON/OFF data of the
specified device, perform the OR/ORI operation using this data and the previous
operation result.
A new operation result is then produced.
Below
is an example ladder logic program and its equivalent sequence instruction list
using the instructions described in this section.
98

Mitsubishi MELSEC A1S63P Specifications

General

Brand	Mitsubishi
Model	MELSEC A1S63P
Category	Controller
Language	English