IMPORTANT INFORMATION
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
6
Pub. No. K29001-00320 Revision: 1
Important Tips for Managing
Safety of Work
You must prepare a "Safety Manual", which
describes your management criteria and
operation rules. The supervisor must have the
operators understand the "Safety Manual"
preliminarily.
In addition, keep the manual at hand so the
operator can read it whenever necessary.
In order to prevent a disaster, the accident
prevention measures must be suitable for the
functions and specifications of this engine.
The accident prevention activities must be as
the occupational safety and health
management system planned and performed
organizationally and continuously. This
occupational safety and health management
system must include the following points:
(a) Proper location of this engine
(b) Instructions concerning maintenance and
usage of the operators' personal
protective equipment
(c) Organization of the operation
management system such as preparation
of operation standards, clarification of the
operation command system, etc.
(d) Education and training of the operators
Important purposes of the safety measures are
to prevent personal injuries, protect the
environment, and protect the engine.
Always consider environmental protection.
Shanghai MHI Engine co., Ltd. (SME) shall
accept no responsibility for loss or injury
resulting from not observing instructions in this
manual, or not paying attention to commonly
required precautions when operating,
inspecting or maintaining this engine.
About This Manual
This manual is intended for native speakers of
the language in which the manual is written. If
the operator of this engine is not a native
speaker of the language used in this manual,
the owner of the engine is requested to provide
thorough safety guidance to the operator. Also
prepare and affix warning labels written in the
native language of the operators.
SME possesses the copyright of this manual.
All rights reserved. No part of this manual,
including illustrations and technical
descriptions, may be photocopied, translated,
or reproduced, in whole or in part, in any
electronic medium or machine readable form
without prior written consent from SME.
Illustrations in this manual may differ from the
engine you have purchased. Covers can be
omitted from illustrations to provide a better
view of the inside.
The contents of this manual are subject to
change without any notice.
When transferring this engine to a third party,
make sure to attach this manual.
Keep this manual in the usual place so that it
can be used any time.
If you need more information or if you have any
questions, contact your SME dealer
"CONTACT LIST" (→ Page 8).
To Next Page
Loading...
Need help?
General
