1 SAFETY
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
60
Pub. No. K29001-00320 Revision: 1
After completing the works, restore the condition as
follows.
1 Inform the other operators that the
works have been completed.
2 Remove the key and tag from the
starting switch of the generator.
3 Check for any operators remaining in
the dangerous area.
4 Inform the user company or
supervisor that the works have been
completed.
5 Start up the engine by the normal
operation procedure.
Body Protection
When working on this engine, obey the
requirements below in order to protect the operator.
Clothing
Fig. 1-7 Clothing
Be sure to wear the appropriate protective clothing
to work.
• Wear tight clothing and fasten cuffs firmly.
• Proper work clothing is valuable protection
against electrical shock.
• If you work while wearing a short sleeved
shirt or short-pants, you may get injured
when you come into contact with something.
• For handling fuel, the engine oil,
coolant, and anti-corrosive agent, refer
to SDS
"Dangerous and Hazardous
Chemicals" (→ Page 69).
To Next Page
Loading...
Need help?
General
