DISASSEMBLY OF BASIC ENGINE
5-11
3.8 Removing oil pan and oil pan gasket
(1)
Remove the bolts from the oil pan, and remove the oil
pan from crankcase.
(2) Remove the oil pan gasket from crankcase.
Removing oil pan and oil pan gasket
3.9 Removing oil pump
Remove the oil pump set bolts, and pull out the oil pump
from crankcase.
Removing oil pump
3.10 Removing camshaft
&$87,21
Be careful not to damage the cams of camshaft and
the bushings.
(1) Rotate the camshaft to see the thrust plate bolt through
the camshaft gear hole.
(2) By using the socket, remove the thrust plate bolt.
(3) Remove the camshaft from the crankcase.
(4) Remove the tappet.
Removing camshaft
3.11 Removing front plate
(1)
Remove the front plate bolts.
(2) Remove the front plate from the crankcase.
Note: If it is difficult to remove the front plate, lightly tap it
with a plastic hammer.
Removing front plate
Oil pump set bolt
Socket
P/N:34491-00300
To Next Page
Loading...
Need help?
General
