Mitsubishi SRK Series User Manual

-
67
-
'18 • SRK-T-250
'09•SRK-DB-087D
(b) Sleep timer operation
(11)
Timer operation
(a) Comfort start-up (ON timer operation)
(c) OFF timer operation
(14)
Air flow range setting
(a) Setting
(i) If the air-conditioning unit is running, press the ON/OFF button to stop.
(ii) Press the AIR FLOW U/D (UP/DOWN) button and the
AIR FLOW L/R (LEFT/RIGHT) button together for 5 seconds
or more.
(iii) Setting the air-conditioning installation location.
(iv) Press the ON/OFF button.
Air flow range Air flow rangeAir flow range
(Left end installation) (Center installation) (Right end installation)
(Center installation)
L/R
L/R
(Right end installation) (Left end installation)
The unit starts the operation 5 to 60 minutes earlier so that the room can approach optimum temperature at ON timer.
The OFF timer can be set at a specific time (in 10-minute units) within a 24-hour period.
(d) Weekly timer operation
Up to 4 programs with timer operation (ON timer / OFF timer) are available for each day of the week.
Take the air-conditioner location into account and adjust the left/right air flow range to maximize air-conditioning.
(12) Silent operation
When the silent operation is set, the unit operates by dropping the outdoor fan speed and the compressor speed.
(13)
Night setback operation
When the night setback operation is set, the heating operation starts with the setting temperature at 10
℃
.
Outdoor fan speed
(Upper limit)
Compressor speed
(Upper limit)
Cooling Heating Cooling Heating Cooling Heating
Cooling Heating
SRK20 SRK25 SRK35 SRK50
4th speed
30 rps
4th speed
46 rps
4th speed
37 rps
4th speed
49 rps
5th speed
46 rps
4th speed
56 rps
4th speed
46 rps
4th speed
70rps
'09•SRK-DB-087D
(10)3D auto operation
(a)
(i)
(ii)
(b)
Cooling
Air flow selection
Operation mode
AUTOHI MED LO
Heating
Room temp. – Setting temp. >5°C Room temp. – Setting temp. 5°C
Setting temp. – Room temp. >5°C Setting temp. – Room temp. 5°C
HIGH POWER AUTO
HI MED LO
HIGH POWER AUTO
<
=
<
=
Flap
Louver
Cooling
Up/down swing
Heating
Wide (Fixed)Center (Fixed)
Flap
Louver
Cooling Heating
Left/right swing
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Flap
Louver
Cooling Heating
Wide (Fixed)
Flap
Louver
Cooling Heating
Horizontal blowing (Fixed) Slant forwardl blowing (Fixed)
Operation mode
Room temp. – Setting temp. 2°C
Setting temp. – Room temp. 2°C
Heating
Cooling
Air flow direction contorol
2°C < Setting temp. – Room temp. 5°C
2°C <
Room temp. – Setting temp. 5°C Room temp. – Setting temp. > 5°C
Setting temp. – Room temp. > 5°C
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
The control in 4) continues. Control returns to the control in 2). Control returns to the control in 1).
<
=
<
=
<
=
<
=
Wide (Fixed)
Flap
Louver
Horizontal blowing (Fixed)
1)
2)
3)
4)
5)
3
4
Fan speed
During cooling and heating (Including auto cooling and heating)
setting temp.
Up/down swing
Center (Fixed)
During DRY operation
room
Room Room
room

Mitsubishi SRK Series Specifications

General

Brand	Mitsubishi
Model	SRK Series
Category	Air Conditioner
Language	English