OFF
ON
CONT. RUN
AUTO
START/STOP
2 CONT. RUN/AUTO
changeover switch
3 ELEC/DIESEL
change over switch
Cover assy, side (R)
Concent assy
1 Main switch
OFF
ON
CONT. RUN
AUTO
START/STOP
17
--
4 Each Switch Operation
(1) Usage of each switch
1 Main switch
2 CONT. RUN/AUTO changeover switch
This switch supplies power to the circuits in the unit.
ON position This switch energizes the electrical
system for the unit.
OFF position This switch deenergizes the
electrical system and the unit will
not operate.
This switch is used to select automatic start/stop or
continuous operation.
Switch upward CONT. RUN (Continuous
operation)
Switch downward AUTO START/STOP
(Automatic start/stop)
ADVICE
The refrigeration unit will not run unless
the main switch and RUN/STOP switch on
the cabin controller are set to "ON".
Normally, turn the main switch to "ON",
and operate the refrigeration unit with the
RUN/STOP switch on the cabin controller.
If the main switch has been turned off, turn
the RUN switch on the cabin controller to
"ON" to resume operation.
ADVICE
When cargo is frozen products
Selecting AUTO to save fuel costs is
recommended.
When cargo is refrigerated products
Selecting AUTO is recom-mended when
fuel costs need to be saved, and selecting
CONT. RUN is recommend-ed when
distribution of the room temperature is
important.
To Next Page
Loading...
Need help?
General
