Note Pre-cool the room to the setting temperature before loading the cargo.
Always pre-cool
before loading
7 Loading
32
--
(1) Preparation before loading
(a) Clean the room.
(b) Inspect the vehicle and the refrigeration unit.
(c) Set the room temperature with the cabin controller.
The room temperature may reach 60°C in the
direct sun during summer. If products are placed
in the room in this state, a temperature fault will
occur during transportation.
If the cooling performance is poor during the
pre-cooling, contact your nearest dealer before
starting loading.
To Next Page
Loading...
Need help?
General
