A-14 DAILY INSPECTION
9.1 Cleaning Chip Conveyor
<Cleaning interval>
Once or twice daily.
<Necessary tools>
• Rags
<Procedure>
1) Press the CHIP CONVEYOR [FOR] button on the
operation panel.
The [FOR] button is illuminated.
The chip conveyor moves forward to discharge chips
from machine.
2) Press the CHIP CONVEYOR [STOP] button.
The [STOP] button is illuminated.
The chip conveyor stops.
3) Place an adequate quantity of rags on the conveyor
belt.
4) Press the CHIP CONVEYOR [BACK] button. The
[BACK] button is illuminated.
Keep pressing the [BACK] button. The chip
conveyor moves backward to discharge chips and
rags out of the machine only when the button is
pressed.
This completes the chip conveyor cleaning procedure.
For further details on the cleaning procedure,
refer to the chip conveyor instruction manual
"COOLANT FILTER MANUAL" published
separately.
WARNING
Before placing rags on the conveyor
belt, disconnect power to prevent
entanglement of fingers and hands in
the rotating unit or between moving
parts, which may result in death or
serious injury.
FOR STOP BACK
CHIP CONVEYOR
To Next Page
Loading...
Need help?
General
