Motorola CL1I series User Manual

17Using the phone
Using your corded base
3. Using the phone
NOTE
Your corded base will automatically time the duration of all external calls. The call timer
will immediately display once you take the call. When the call ends, the total duration of
your talk time is shown for 6 seconds.
3.1 Calls
3.1.1 Make a call
1. Lift the handset and dial the number.
3.1.2 Preparatory dialling
1. Dial the number rst. If you make a mistake press
D to delete the last digit.
2. Either lift the handset to dial automatically or press
H to dial over hands-free
dialling and monitoring.
3. Once the call is answered lift the handset to talk.
3.1.3 End a call
1. Place the handset back on the base or press
H to end a hands-free dialling and
monitoring call.
Or:
2. Press
D to end a call and reconnect to a new line.
3.1.4 Receive a call
1. Simply lift the corded handset to answer the call.
NOTE
The hands-free dialling and monitoring function can only be used to listen over the base
speaker, if you wish to talk you must lift the handset.
If during a call you want to activate hands-free dialling and monitoring, press
H and
hang up the handset.
3.2 Adjust the earpiece volume
1. During a call, press
U
or d to increase or decrease the earpiece and hands-free
dialling and monitoring volume. There are 4 levels to choose from.
3.3 Hold
You can place your caller on hold so that you and your caller hear hold music.
1. During a call, press the
h button, the display shows hoLd and you and your caller
will hear music.
2. Press
h again to resume your call.

Motorola CL1I series Specifications

General

Brand	Motorola
Model	CL1I series
Category	Telephone
Language	English