3 CONNECTING YOUR DCX SET-TOP
17
Connecting an SDTV
1. Connect the stereo audio cable to the AUDIO L/R connectors
on the DCX
set-top and the AUDIO L/R connectors on the
Standard-Definition TV (SDTV).
2. Connect an S-Video cable to the S-Video out connector on the
DCX set-top and the
input S-Video on the TV.
Note: If the TV does not support S-Video connections, composite video
connections may be used in place of S-Video connection.
Note: If the TV does not support S-Video or composite video
connections, use the RF out connector on the DCX set-top. The RF
connection carries video and audio.
These video connection methods do not support HD video. If you have
an HDTV, see
Connecting HDTV — Single Connection for Video/Audio.
To Next Page
Loading...
Need help?
General
