27
6 CONFIGURING THE AUDIO, VIDEO, AND CLOSED CAPTION
SETTINGS
The following describes how to configure the audio (for HDMI
connections), SD and HD video settings, and closed caption settings for
the DCX3200.
Before you adjust the output settings:
• Connect the DCX3200 to the TV and other home
entertainment devices
• Plug the DCX3200 into an AC power outlet
• Initialize the DCX3200 and authorize it for services
• Turn the TV on
When using an HDMI connection between the DCX3200 and the
television, be sure to have the cable connected and the TV powered on
before adjusting the video settings. Motorola recommends using HDMI
cables less than 20 meters long.
To configure the DCX3200 settings on the User Settings menu screen:
1. Power off the DCX set-top and then immediately press the
menu key on the remote control. If your TV is on, the
on-screen User Settings menu lists the DCX3200 settings that
can be adjusted:
To Next Page
Loading...
Need help?
General
