Motorola E2 Series User Manual

20
Phonebook
4. Phonebook
You can store up to 50 names and numbers in the phonebook. Names can be up
to 12 characters long and numbers up to 24 digits.
4.1 Store a name and number
If the E2 is connected to a switchboard, you may need to enter a pause in a stored
number. This gives the switchboard time to find an outside line.
A pause is normally stored after the switchboard access code (e.g. 9). When
storing a number, press and hold
#
until the display shows P. You can then
continue entering the phone number.
If you have subscribed to Caller ID Service and wish to display the name of your
caller instead of the number, save the full telephone number including the area
code to your phonebook.
You can store multiple entries with the same name. However, to prevent
unnecessary duplicated entries, you can only store the number once.
1. Press
M. The display shows PHONEBOOK .
2. Press
M, scroll d to ADD NEW .
3. Press
M. The display shows ENTER NAME .
4. Enter the name and press
M. The display shows ENTER NUMBER .
5. Enter the number and press
M to save.
6. The display shows
ADD NEW .
7. Enter the next name and number entry that you wish to store in your
phonebook or press
e
to return to standby.
Entering names
Use the keypad letters to enter names, e.g. to store TOM:
Press
8 once to enter T.
Press
6 three times to enter O.
Press
6 once to enter M.
Writing tips
Press
B to delete the last character or digit.
Press
u or d to move between characters or digits.
Press
1 to insert a space.
Use
1 twice to insert a dash.

Motorola E2 Series Specifications

General

Brand	Motorola
Model	E2 Series
Category	Cordless Telephone
Language	English