Motorola E2 Series User Manual

30
Base settings
9. Base settings
9.1 ECO mode
Your E2 oers ECO mode function which reduces the transmitted power and
energy consumption when switched on.
To switch Eco mode on:
1. Press
M, scroll d to ADVANCED SET and press M.
2. The display shows
ECO MODE , press M.
3. Press
u or d to select ON or OFF .
4. Press
M to confirm or B to return to the previous menu.
Note
When ECO mode is set to ON, the handset range will be reduced.
9.2 ECO PLUS
When ECO PLUS is activated and the unit has been idle for 1 minute the
transmitted power between the handset and the base will stop, an incoming call
or pressing any key will activate the unit and it will revert back to the normal
mode, until it has been idle again for 1 minute. This feature is set to OFF by default.
To switch ECO PLUS on:
1. Press
M, scroll d to ADVANCED SET and press M.
2. Scroll
d to ECO PLUS and press M.
3. Press
u or d to select ON or OFF .
4. Press
M to confirm or B to return to the previous menu.
9.3 Auto Prefix
You can set the phone to detect a dialling number and replace it with another
number. The number to be detected can be up to 5 digits long. It can be replaced
with a number up to 10 digits long.
1. Press
M, scroll d to ADVANCED SET and press M.
2. Scroll
d to AUTO PREFIX , press M.
3.
DIGIT DETECT is displayed. Press M.
4. Enter the number you want to be detected and press
M.
5. The display shows
PREFIX , press M.
6. Enter the number you want it replaced with.
7. Press
M to confirm or e to return to standby.

Motorola E2 Series Specifications

General

Brand	Motorola
Model	E2 Series
Category	Cordless Telephone
Language	English