27
27 General Radio Features Operation
(cont.)
Transmitter Disable Operation
(Non-SECURENET-Equipped Radios Only)
If your radio is
NOT
SECURENET-equipped, the Transmitter Disable feature,
when enabled in your radio (via radio service software [RSS] programming, allows
you to put the radio in a condition where it will not transmit. This will prevent the
radio from accidentally transmitting in a hazardous environment. All
transmissions, including automatic data transmissions, will be inhibited.
To disable the radio transmitter, put the two-position concentric switch in
the“
” position. When your radio's transmitter has been disabled, pressing the
PTT switch will cause a low-pitched alert tone to sound, indicating that a
transmission is not taking place.
Note: While the transmission is disabled, if you attempt to transmit, the
display will react as in normal operation. However, the red LED transmit indicator
will not turn on.
To enable the transmitter for normal operation, put the two-position
concentric switch in the “ ” position.
Native Language Displays
This feature allows you to choose any one of six languages for your radio
displays:
1. English
2. Spanish
3. Italian
4. French
5. German
6. Portuguese
All of your radio displays will be shown in the selected language.
To Next Page
Loading...
Need help?
General
