Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Units together, you must be able to establish a
radio link between them, and the range will be affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or
reinforced concrete between the Baby and Parent Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or by radio
or electrical equipment, such as TVs, computers, cordless or mobile phones,
fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
®
routers), Bluetooth
TM
systems, or microwave ovens, may cause interference with this product, so keep the
baby monitor away at least 5ft (1.5m) from these types of products, or turn them off if
they appear to be causing interference.
• If the signal is weak, try lifting up the Parent Unit Antenna, or move the Parent and/or the
Baby Unit to different positions in the rooms.
1. Photo Sensor (Night Vision Mode) 7. ON/OFF Switch
2. Camera Lens 8. Power Adapter Socket
3. Infrared LED 9. Antenna
4. Power LED 10. Temperature Sensor
5. Microphone 11. Pair Key
6. Speaker
Parent unit menu icons (cont’d)
Overview of Your Baby Unit
Volume Level Control (8 Levels)
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
Lullaby Control (5 Song Selections)
Alarm Setting (6h, 4h, 2h, Off)
Temperature scale select (ºC / ºF).
Readings display in BLUE, but turn RED if > 29 ºC / 84 ºF or < 14 ºC / 57 ºF.
Displays HH ºC / ºF if > 36 ºC / 97 ºF.
Displays LL ºC / ºF if < 1 ºC / 34 ºF.
Camera Selection (scan, view, add, delete)
View multiple cameras on screen (Picture in Picture). Available when you
have more than 1 Baby Unit (Camera).
Set Video On Timer (5 min, 30 min, 60 min)
To Next Page
Loading...
Need help?
General
