Motorola MG7700 User Manual

Configuration Manager
You may not need to use the Configuration Manager. Here are some
reasons for using the Configuration Manager:
 You want to change the wireless router setup. For instance, maybe
you’re replacing a router and want to use your existing Wireless
Network Name and/or Password instead of the unique ones that come
with the MG7700.
 You want to set up special Internet gaming settings.
 You want to set up parental controls including white lists and/or black
lists for certain users and times.
 You want to get performance information about the MG7700 modem
and/or built-in router. This can be helpful in optimizing wireless
performance.
If you need to access the MG7700 Configuration Manager, open your
Web browser. Type http://192.168.0.1 in the address bar and press
the Enter key.
In the login dialog box, type the following User Name and Password in
lower case, then click OK.
User Name: admin
Password: motorola
The status page will appear. If the Status page doesn’t appear, please
see the Troubleshooting Tips below.
For details about the Configuration Manager, please see
www.motorolacable.com/MG7700manual
Wireless Router

Motorola MG7700 Specifications

General

DOCSIS	3.0
Channels	24x8
Built-in Router	Yes
Wi-Fi	Yes
WiFi Speed	AC1900
Ethernet Ports	4
Maximum Downstream Speed	1000 Mbps
Wireless Standard	802.11ac
Type	Cable Modem
Compatibility	Comcast Xfinity, Cox, Spectrum
Wireless Security	WPA, WPA2