Motorola PRO5150 User Manual

22
English
SCAN
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls
or noise (a “nuisance” channel), use the Scan
button to temporarily delete the channel from the
scan list:
Restoring a Channel Back to the Scan List
To restore a previously deleted channel back to
the scan list, restart the scan operation or turn
your radio off and on again.
SCAN CHANNEL DISCOVERY ALERT
This feature enables you to identify the last
channel monitored before scanning was
stopped. To identify the last channel moni-
tored, turn the Channel Selector knob until
you hear an alert tone.
1 While the radio is on the nuisance channel, hold
down the Scan button until you hear a tone.
2 Release the Scan button. The nuisance chan-
nel is deleted.
Note: You cannot delete a priority channel or
the last remaining channel in a scan list.

Motorola PRO5150 Specifications

General

Channel Capacity	16 channels
Dimensions	137 mm x 57.5 mm x 37.5 mm
Operating Temperature	-30°C to +60°C
Emergency Button	Yes
IP Rating	IP54
Frequency Range	136-174 MHz, 403-470 MHz
Power Output	VHF: 5W, UHF: 4W
Weight	420 g (with battery)
Signaling	MDC1200
Battery Life	Up to 11 hours (with high capacity battery)