Motorola SLVR L7 User Manual

104 pages

To Next Page

To Previous Page

customize

time & date

Your phone needs the time and date for the datebook.

To synchronize the time and date with the network:

Press

Settings

Initial Setup

Time and Date

Autoupdate

To set the time and date: Press

Settings

Initial Setup

Time and Date

> time or date.

Note:

To manually set the date and time you must turn

Autoupdate off.

To choose an

analog or digital

clock for your home screen,

press

Settings

Personalize

Home Screen

Clock

Analog

Digital

wallpaper

Set a photo, picture, or animation as a wallpaper (background)

image in your home screen.

Find it:

Press

Settings

Personalize

Wallpaper

options

Picture

Select an image for your wallpaper, or

None

for no

wallpaper.

Layout

Select

Center

to center the image in the display,

Tile

to repeat the image across the display, or

Fit-to-screen

to stretch the image across the display.

Other manuals for Motorola SLVR L7

Service Manual52 pages

Questions and Answers:

K
kimberlymorenoAug 12, 2025
Why won't my Motorola SLVR L7 turn on?
- M
  Michael EricksonAug 12, 2025
  Your Motorola Cell Phone might not be turning on due to several reasons: * The battery may be completely discharged or defective. Try recharging the battery with an appropriate charger. If it doesn't recharge, replace the battery. * The battery terminals could be open or misaligned. Inspect the terminals on both the battery and the phone, realigning if necessary. If issues persist, consider replacing the battery. * A defective transceiver board can also cause this issue. In this case, replace the transceiver board.
T
taveryAug 15, 2025
What to do if my Motorola SLVR L7 has poor reception?
- E
  Erin MarshallAug 15, 2025
  If your Motorola Cell Phone has poor reception, calls frequently drop, or the audio is weak or distorted, the issue might be: * A defective antenna. Check the connection between the antenna and the transceiver board. If the connection is good, try replacing the antenna. * A defective transceiver board. Replace the transceiver board.