Motorola V3 SERIES User Manual

14 September 26, 2006 6809505A63-O
Tools and Test Equipment V3xx
Tools and Test Equipment
The following table lists tools and test equipment recommended for disassembly and reassembly
of V3xx telephones. Use either the listed items or equivalents.
Table 1. General Test Equipment and Tools
Motorola Part Number
1
Description Application
0-00-00-40810 (U)SIM test card Used to enable manual test procedures.
RSX4043-A Torque Driver Used to remove and replace screws
— Torque Driver Bit T-3, T-5 and T-3 Torx Used with torque driver
See Table 7 Rapid Charger
Used to charge battery and to power
device
0180386A82
Antistatic Mat Kit (includes 66-80387A95
antistatic mat, 66-80334B36 ground
cord, and 42-80385A59 wrist band)
Provides protection from damage to
device caused by electrostatic discharge
(ESD)
0-00-00-30005 (AMS)
2
Disassembly tool, plastic with flat and
pointed ends (manual opening tool)
Used during assembly/disassembly of
device
19501980 (AMS)
2
Generic press tool
Used to assemble the main lens and CLI
lens.
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.
2. Not available from Motorola. To order, contact: AMS Software & Elektronik GmbH, c/o Holger Grube, Lise-Meitner-
Straße9 D-24941 Flensburg Tel.: +49-461-90398-0 Fax: +49-461-90398-50.
1 and 2
6809505A64-O
V3xx

Motorola V3 SERIES Specifications

General

Brand	Motorola
Model	V3 SERIES
Category	Cell Phone
Language	English