Overview - Indoor Unit Display
mrcool.com
Display Code Meanings
Page 7
NOTE: Different models will have a different front panel and display window. Not all of the
features listed below will be equipped on the unit you have purchased. Please check the indoor
unit display window of the unit purchased to see which of these features your unit has.
Illustrations in this manual are for explanatory and demonstration purposes only. The actual
shape of your and size of your indoor unit may be different.
Fig. 1.2
Front Panel
Different Versions
of The Display
Window
(A)
(B)
(C)
(D)
When ECO function is activated (some units)
Units of measure, displays as either °C (Celcius) or °F (Fahrenheit). It will display
in a different color depending on the mode the unit is operating in:
• Under COOL or DRY mode, it will display as a cool color (Blue).
• Under HEAT mode it will display as a warm color (Red).
This will display when the Wireless Control feature is activated (some units).
This is the temperature display and will also display operational features and
error codes:
will display for 3 seconds when:
• TIMER ON is set (if the unit is OFF, will remain on the display screen
when the Timer On is set).
• SWING, TURBO, SILENCE, or SOLAR PV ECO features
are turned on.
will display for 3 seconds when:
• TIMER OFF is set.
• SWING, TURBO, SILENCE, or SOLAR PV ECO features are turned off.
will display when the anti-cold air feature is activated.
will display when the unit is defrosting (cooling & heating units).
will display when the unit is self-cleaning.
will display when the 46.4°F (8°C) heating feature is activated.
To Next Page
Loading...
Need help?
General
