MrCool Universal Series User Manual

Page 35 mrcool.com
Maintenance
Error Code
WARNING
1) When abnormalities occur, stop the unit immediately and disconnect power. Contact
MRCOOL. If the unit continues to run abnormally, it may damage the unit and cause an
electric shock or a fire hazard.
2) DO NOT attempt repairs to the appliance yourself. Improper repair and maintenance
can create electric shock and fire hazards. Please contact MRCOOL Tech Support for
further guidance or a qualified professional for repairs.
Number Error Code Error
1 E1 Compressor high pressure protection
2 E4 Compressor air discharge high-temperature protection
4 F2 Condenser temperature sensor error
5 F3 Outdoor ambient temperature sensor error
6 F4 Discharge temperature sensor error
7 F6 Outdoor unit tube temperature sensor error
8 C5 Indoor unit jumper cap error
9 EE Outdoor unit memory chip error
10 PF Electric box sensor error
11 H3 Compressor overload protection
12 H4 Overload
13 H5 IPM protection
14 H6 DC fan error
15 H7 Driver out-of-step protection
16 HC Pfc protection
17 Lc Startup failure
18 Ld Compressor phase-sequence protection
19 LF Power protection
20 U7 4-way valve switch-over error
21 P0 Drive reset protection
3 E3
Compressor low pressure protection, refrigerant lack protection and refrigerant
collecting mode
If the display panel or wired control displays an error code, please refer to the following table:

MrCool Universal Series Specifications

General

Brand	MrCool
Model	Universal Series
Category	Inverter
Language	English