Page 8mrcool.com
WARNING
The unit must be installed in a location strong enough to support the weight of the unit and fixed
securely, to avoid toppling.
Install the appliance in a location where the inclination is less than 5°.
Do not install the unit in a location with direct sunlight.
Do not install the unit where combustible gas leakage may occur.
1.
2.
3.
4.
2
Unit Installation
Installation Location
Selection of Installation Location for Outdoor Unit
Select a location pursuant to the following conditions:
Noise and air flow produced by the outdoor unit will not disturb neighbors.
The location is away from animals and plants. If not, please add safety fences to protect the unit.
The area is well-ventilated with no nearby obstacles that could obstruct air flow.
The location is able to support the weight and withstand the operating vibration of the unit.
Installation is able to be performed safely.
The location area is free of combustible or corrosive gas, and oil smoke.
Unit is able to be shielded from strong wind. Strong wind may affect the outdoor fan and lead to
insufficient air flow volume, thus affecting performance.
Unit is away from objects which can generate or amplify noise during operation.
Condensate can be safely drained from the unit.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1. The Conventional Weld Line Set Installation
Instructions can be found on pages 14 through 21
OR
View complete install video by scanning this QR code
2.
No-Vac
®
Quick Connect
®
Line Set
Installation
Instructions can be found on page 22
OR
View complete install video by scanning this QR code
The Universal™ Series has 2 installation methods
MRCOOL
®
Preferred Method
To Next Page
Loading...
Need help?
General
