2-18
MS-7005 Micro ATX Mainboard
Connected to JSP1
SPDIF Bracket (Optional)
SPDIF Connector: JSP1
The connector is used to connect SPDIF (Sony & Philips Digital Interconnect
Format) interface for digital audio transmission.
The JSP1 supports SPDIF output only and
can be connected to an external SPDIF Bracket
for digital audio transmission.
Front USB Connectors: JUSB1/JUSB2
The mainboard provides two USB 2.0 pin headers JUSB1 & JUSB2 that are
compliant with Intel
®
I/O Connectivity Design Guide. USB 2.0 technology increases
data transfer rate up to a maximum throughput of 480Mbps, which is 40 times faster
than USB 1.1, and is ideal for connecting high-speed USB interface peripherals such
as USB HDD, digital cameras, MP3 players, printers, modems and the like.
JUSB1
(USB 2.0/Intel spec)
1
9
2
10
JUSB2
(USB 2.0/Intel spec)
1 9
2 10
PIN SIGNAL PIN SIGNAL
1 VCC 2 VCC
3 USB0- 4 USB1-
5 USB0+ 6 USB1+
7 GND 8 GND
9 Key 10 USBOC
JUSB1/2 Pin Definition
JSP1
1
3
JSP1 Pin Definition
PIN SIGNAL
1 VCCS
2 SPDIF0
3 GND
To Next Page
Loading...
Need help?
General
