3-17
BIOS Setup
▍
MS-7599
bioS Setting paSSword
When you select ths functon, a message as below wll appear on the screen:
U-Key
Ths tem s used to enable/ dsable USB drver devce as a key.
Make U-Key at
Ths tem s used to specfy the USB drver devce as a key.
Change Supervsor Password
Ths tem s used to set the supervsor password.
Important
Type the password, up to eght characters n length, and press <Enter>. The password
typed now wll replace any prevously set password. You wll be prompted to conrm the
password. Retype the password and press <Enter>. You may also press <Esc> to abort
the selecton and not enter a password.
To clear a set password, just press <Enter> when you are prompted to enter the pass-
word. A message wll show up conrmng the password wll be dsabled. Once the
password s dsabled, the system wll boot and you can enter Setup wthout enterng
any password.
When a password has been set, you wll be prompted to enter t every tme you try to
enter Setup/ System. Ths prevents an unauthorzed person from changng any part of
your system conguraton.
About Supervsor Password
Supervsor password: Can enter and change the settngs of the setup menu.
▶
▶
▶
To Next Page
Need help?
General
