Chapter 5
5-22
Our products are under continual improvement, and there may be a later
version of the BIOS to solve the existing problems on displays or the
installation. When you use the flash utility* to update the BIOS on the card, it
is inevitable that your devices may encounter some unexpected risks, such
as power interruption, during the updating process. If, unfortunately, the
updating procedure is failed and the VGA card cannot work anymore --- this
powerful technology can solve your problems!
If you fail to update the BIOS, and have to use this function to save your VGA
card, please follow the steps below:
1. Turn off the power and remove the computer case.
2. Locate the jumper on the VGA card, and set it up to enter the BIOS II
mode (safe mode).
3. Do not replace the case first and turn on the power.
To Next Page
Loading...
Need help?
General
