3-43
Getting Started
ExpressCard Installation
This computer provides an ExpressCard slot. The new ExpressCard interface is smaller and faster
than PC Card interface. The ExpressCard technology takes advantage of the scalable,
high-bandwidth serial PCI Express and USB 2.0 interfaces.
The following instruction provides you with a basic installation for the ExpressCard, including how to
install and remove it. For more information, please refer to the manual of your ExpressCard.
Removing the ExpressCard
1. Locate the ExpressCard slot on your notebook. There might be a dummy card inserted in the
slot, remove the ExpressCard or dummy card with the same steps below.
2. Press the card to make the card stretch out first.
3. Pull the card out of the slot
4. Empty Slot
Installing the ExpressCard
5. Insert the card into the slot (usually with its label facing up)
6. Push the card into the slot until it is firmly seated.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General
