4-7
BIOS Setup
Advanced Menu
Intel(R) SpeedStep(tm)
This item allows you to enable or disable Intel SpeedStep technology.
When set to Disabled, the system always operates in a conserve power
mode. If you want optimize the processor, set this item to Enabled, so
that the processor’s speed will be controlled by the use of your operating
system and applications. Setting options: Enabled, and Disabled.
SATA Mode Selection
Use this item to change the SATA Mode. Setting options: IDE, AHCI and
RAID.
PCI Latency Timer
This item controls how long each PCI device can hold the bus before
another takes over. When set to higher values, every PCI device can
conduct transactions for a longer time and thus improve the effective PCI
bandwidth.
For better PCI performance, you should set the item to higher values.
Setting options: 32, 64, 96, 128, 160, 192, 224, and 248.
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Enable/Disable Intel(R)
SpeedStep(tm)
Enter:
+/-:
F1:
F9:
F10:
Select
Change Opt.
General Help
Optimized Defaults
Save ESC: Exit
:
Select Screen
:Select Item
Intel(R) SpeedStep(tm)
SATA Mode Selection
PCI Latency Timer
USB Configuration
[Enabled]
[RAID]
Boot Security Save & Exit
ptio Setup Utility - Copyright (C) 2009 American Megatrends, Inc.
[32 PCI Bus Clocks]
AdvancedMain
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General
