EasyManuals Logo

MSI MS-7222 User Manual

MSI MS-7222
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
5-10
MS-7222 Micro-ATX Mainboard
Install Driver in Windows OS
New Windows OS (2000/XP/NT4) Installation
The following details the installation of the drivers while installing Windows XP.
1. Start the installation:
Boot from the CD-ROM. Press F6 when the message "Press F6 if you need
to install third party SCSI or RAID driver" appears.
2. When the Windows Setup window is generated, press S to specify an
Additional Device(s).
3. Insert the driver diskette VIA VT8237R Disk Driver into drive A: andpress
<Enter>.
4. Depending on your operation system, choose VIA RAID Controller
(Windows XP), VIA RAID Controller(Windows 2000) or VIA RAID Controller
(Windows NT4) from the list that appears on Windows XP Setup screen, press
the <Enter> key.
5. Press <Enter> to continue with installation or if you need to specify any addi-
tional devices to be installed, do so at this time. Once all devices are specified,
press <Enter> to continue with installation.
6. From the Windows XP Setup screen, press the <Enter> key. Setup will now
load all device files and then continue the Windows XP installation
Existing Windows XP Driver Installation
1. Insert the MSI CD into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Under the Driver tab, click on VIA SATA RAID Drivers.
4. The drivers will be automatically installed.
Confirming Windows XP Driver Installation
1. From Windows XP, open the Control Panel from My Computer followed by
the System icon.
2. Choose the Hardware tab, then click the Device Manager tab.
3. Click the "+" in front of the SCSI and RAID Controllers hardware type. The
driver VIA SATA RAID Controller should appear.
Installing RAID Software & Drivers
MSI Reminds You...
Please follow the instruction below to make a VIA Serial ATA RAID
driver for yourself.
1.Insert the MSI CD into the CD-ROM drive.
2.Ignore the Setup screen and use Explorer to browse the
CD.
3.Copy all the contents (including the sub-folders) in the
\\IDE\VIA\Floppy to a fomatted floppy disk.
4.The driver disk for VIA Serial ATA driver is done.

Table of Contents

Other manuals for MSI MS-7222

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI MS-7222 and is the answer not in the manual?

MSI MS-7222 Specifications

General IconGeneral
BrandMSI
ModelMS-7222
CategoryMotherboard
LanguageEnglish

Related product manuals