MSI MS-7353 User Manual

MS-7353 Mainboard
2-8
3
DIMM1
DIMM2
DIMM3
DIMM4
DIMM5
DIMM6
Dual channel mode
population rule for DDR3
(And please install two
DDR2/DDR3 Turbo Cards
into DIMM1 and DIMM4)
Installing Memory Modules
1. The memory module has only one notch on the center and will only fit in the right
orientation.
2. Insert the memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
3. The plastic clip at each side of the DIMM slot will automatically close.
Important
You can barely see the golden finger if the memory module is properly inserted
in the DIMM slot.
Volt
Notch

MSI MS-7353 Specifications

General

Brand	MSI
Model	MS-7353
Category	Motherboard
Language	English