3-26
MS-7353 Mainboard
CPU and Memory Clock Overclocking
The D.O.T. Control, Adjust CPU FSB Frequency, FSB/Memory Ratio are the
items for you to overclock the CPU and the Memory. Please refer to the descriptions
of these fields for more information.
2. At the fourth reboot, BIOS will determine that the previous overclocking is failed
and restore the default settings automatically. Please press any key to boot the
system normally when the following message appears on screen.
Warning !!! The previous performance of overclocking is failed,
and the system is restored to the defaults setting,
Press any key exclude "DEL" to enter SETUP.......
Clear CMOS
- Please refer to “chapter 2” for more information about how to clear CMOS data.
Two ways to save your system from failed overclocking...
Reboot
1. Press the Power button to reboot the system three times. Please note that, to
avoid electric current to affect other devices or components, we suggest an
interval of more than 10 seconds among the reboot actions.
1.CPU Speed = CPU Frequency * CPU Ratio
2.This motherboard supports overclocking greatly. However, please make
sure your peripherals and components are bearable for some special
settings. Any operation that exceeds product specification is not
recommended. Any risk or damge resulting from improper operation will
not be under our product warranty.
Important
To Next Page
Loading...
Need help?
General
