To Next Page

To Previous Page

Safety Instructions

∙ Read the safety instructions carefully and thoroughly.

∙ All cautions and warnings on the device or user’s manual should be noted.

∙ Refer servicing to qualified personnel only.

∙ Keep the User’s Guide that comes with the package for future reference.

∙ To prevent fire or shock hazard, keep this device away from humidity and high

temperature.

∙ Lay this device on a reliable flat surface before setting it up.

∙ Make sure that the power voltage is within its safety range and has been adjusted

properly to the value of 100~240V before connecting the device to the power outlet.

Do not disable the protective earth pin from the plug. The device must be connected

to an earthed mains socket-outlet.

∙ Always disconnect the power cord or switch the wall socket off if the device would

be left unused for a certain time to achieve zero energy consumption.

∙ The ventilator on the device is used for air convection and to prevent the device from

overheating. Do not cover the ventilator.

∙ Do not leave the device in an unconditioned environment with a storage temperature

above60℃orbelow-20℃,whichmaydamagethedevice.

∙ NOTE:Themaximumoperatingtemperatureisaround40℃.

∙ When cleaning the device, be sure to remove the power plug. Use a piece of soft

cloth rather than industrial chemical to clean the device. Never pour any liquid into

the opening; that could damage the device or cause electric shock.

∙ Place the power cord in a way that people are unlikely to step on it. Do not place

anything on the power cord.

∙ Always keep strong magnetic or electrical objects away from the device.

∙ If any of the following situations arises, get the device checked by service personnel:

•The power cord or plug is damaged.

•Liquid has penetrated into the device.

•The device has been exposed to moisture.

•The device does not work well or you can not get it work according to user’s

manual.

•The device has dropped and damaged.

•The device has obvious sign of breakage.

∙ To prevent the monitor from tipping over, secure the monitor to a desk, wall or fixed

object with a anti-tip fastener that helps to properly support the monitor and keep it

safe in place.

⚠

Important

Please confirm the power distribution system in the installation site shall provide the

circuit breaker rated 120/240V, 20A (maximum).

Questions and Answers:

Need help?

Do you have a question about the MSI Optix AG321CQR and is the answer not in the manual?

MSI Optix AG321CQR Specifications

General

AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
AC adapter output voltage	19 V
Power consumption (standby)	- W
Power consumption (typical)	40 W
Panel type	VA
Color gamut	97.59 %
Pixel pitch	0.2724 x 0.2724 mm
Display diagonal	31.5 \
Anti-glare screen	Yes
Display technology	LCD
Native aspect ratio	16:9
Screen curvature rating	1500R
Viewable size, vertical	392.3 mm
sRGB coverage (typical)	123.62 %
Contrast ratio (dynamic)	100000000:1
Contrast ratio (typical)	3000:1
Display number of colors	1.07 billion colors
Display diagonal (metric)	80 cm
Viewable size, horizontal	697.3 mm
Digital vertical frequency	30 - 165 Hz
Digital horizontal frequency	90.9 - 242 kHz
Display brightness (typical)	250 cd/m²
DisplayPort version	1.2
USB upstream port type	USB Type-B
VGA (D-Sub) ports quantity	0
Pivot angle	-5 - 5 °
Tilt angle range	-5 - 20 °
Panel mounting interface	75 x 75 mm
Compatibility	PC, Mac, PS5, PS4, Xbox, Mobile, Notebook
Package type	Box
Package depth	545 mm
Package width	945 mm
Package height	173 mm
Package weight	8980 g
Product color	Black
Market positioning	Gaming
Harmonized System (HS) code	85285210