MTS Sensors Temposonics R Series Datasheet

R-Series Models RP and RH Temposonics
®
Linear-Position Sensors - SSI Output
Product Data Sheet, Part No.: 550989 Revision E (EN) 05/2014 MTS Sensors6
Model RP profile-style sensor dimension references
MODEL RP, PROFILE-STYLE SENSOR WITH CAPTIVE-SLIDING MAGNET
Drawing is for reference only, contact applications engineering for tolerance specific information.
49 mm
(1.92 in.)
9 mm
(0.36 in.)
50 mm (1.97 in.)
68 mm (2.68 in.)
5.5 mm
(0.21 in.) dia.
for M5 or #10
screw (2X)
45 mm
(1.77 in.)
12 mm (0.47 in.)
12 mm (0.47 in.)
75 mm
(2.95 in.)
Stroke length
82 mm (3.2 in.)
Dead zone
End of stroke
‘Span’ position
Beginning of stroke ‘Null’ position
Mounting foot, moveable
(part no.: 400802)
Electronics
housing
Captive-sliding magnet
2 mm
(0.07 in.)
D70
integral connector option
Figure 9. R-Series Model RP Profile-style sensor dimension reference (Shown with D70 Integral connector option)
MODEL RP, PROFILE-STYLE SENSOR WITH OPEN-RING MAGNET
Drawing is for reference only, contact applications engineering for tolerance specific information.
Mounting support
(non-ferrous material)
Open-ring magnet
Beginning of stroke ‘Null’ Position
Stroke length
66 mm
(2.6 in.)
Mounting foot, moveable
(part no.: 400802)
28 mm
(1.1 in.)
30 mm
(1.2 in.)
28 mm
(1.1 in.)
Dead zone
Electronics
housing
P05
integral cable option
End of stroke
‘Span’ Position
Figure 10. R-Series Model RP Profile-style sensor dimension reference (Shown with P05 Integral cable option)
Standard magnet selections (Model RP)
SELECTION OF POSITION MAGNETS (ONE MAGNET INCLUDED WITH MODEL RP SENSOR)
A choice of two magnet mounting configurations are available with the profile-style sensor; A ‘captive-sliding’ magnet, Styles S or V or an
‘open-ring’ magnet, Style M. Captive-sliding magnets utilize slide bearings of special material that reduce friction, and if required, help mitigate
dirt build up. The slide bearings are designed to operate dry, requiring no external lubrication or maintenance.
The Style M ‘open-ring’ magnet mounts on the moving machine part and travels just above the sensor’s profile extrusion. The open-ring
magnet requires a minimum distance away from ferrous metals to allow proper sensor output. It must be mounted using non-ferrous screws
and a non-ferrous support bracket, or utilize a non-ferrous spacer of at least 5 mm (0.2 in.) thickness.
POSITION MAGNET SELECTIONS (Drawing dimensions are for reference only)
Magnet dimensions Mounted magnet dimensions Description Part number
40 mm
(1.58 in.)
25 mm
(1 in.)
20 mm
(0.79 in.)
43 mm
(1.69 in.)
14 mm
(0.55 in.)
Rotation:
Vertical: 18°
Horizontal: 360°
Ball-jointed arm
(M5 thread)
45 mm
(1.77 in.)
52 mm
(2.05 in.)
Captive-sliding magnet, Style S
For Model RP profile-style sensor
252182
40 mm
(1.58 in.)
25 mm
(1 in.)
9 mm
(0.35 in.)
57 mm
(2.24 in.)
14 mm
(0.55 in.)
Rotation:
Vertical: 18°
Ball-jointed arm
(M5 thread)
36 mm
(1.41 in.)
Captive-sliding magnet,
Style V
For Model RP profile-style sensor
252184
R-Series Model RP Profile-Style Sensor Dimension References
Model RP Standard Magnet Selections

MTS Sensors Temposonics R Series Specifications

General

Brand	MTS Sensors
Model	Temposonics R Series
Category	Accessories
Language	English