MTS Systems Exceed 40 Series Site Preparation Guide

MTS Exceed™ Series 40 Site Preparation Guide Lift and Move Instructions
29
Lift and Move Instructions
This section provides guidelines for lifting and moving your MTS Exceed
material test system.
Unless otherwise specified, it is your responsibility to safely off-load, unpack,
and move the equipment to the final location on your premises. Equipment
insurance is also your responsibility.
Before moving the equipment from the receiving area to its final location, check
the dimensions of all doors and passages through which the machine will travel.
For dimensions, see “Packaging Dimensions and Weight” on page 18 and the
“Load Frame Dimensions and Weight” on page 19 on system specification
section.
Contents Moving E42 Single-Column Frames 30
Moving E43 Double-Column Frames 33
Moving E44 and E45(Standing position) Frames 35
Moving E45(prone position) Frames 41
The MTS Exceed frames are heavy.
Moving the frame using improper procedures can injure personnel (for
example, strained muscles and back injuries) or damage the frame.
When lifting the frame, take the appropriate precautions to prevent injuries
to yourself. Moving and positioning the MTS Exceed frame must be
performed by qualified personnel only.
MTS Exceed frames weigh from 115–3500 kg (254.5–7716 lb). Other apparatus
such as the pallet, packaging, and accessories add to the overall weight. If you
have any questions, call MTS.
WARNING

MTS Systems Exceed 40 Series Specifications

General

Brand	MTS Systems
Model	Exceed 40 Series
Category	Test Equipment
Language	English