EasyManuals Logo
Home>National Instruments>I/O Systems>9220

National Instruments 9220 User Manual

National Instruments 9220
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
has been evaluated as Ex nC IIC T4, Ex IIC T4, Ex nA IIC T4, or
Ex nL IIC T4 equipment.
Caution You must make sure that transient
disturbances do not exceed 140% of the rated voltage.
Caution The system shall only be used in an area of
not more than Pollution Degree 2, as defined in
IEC/EN 60664-1.
Caution The system shall be mounted in an
ATEX/IECEx-certified enclosure with a minimum
ingress protection rating of at least IP54 as defined in
IEC/EN 60079-15.
Caution The enclosure must have a door or cover
accessible only by the use of a tool.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory
requirements and limits for electromagnetic compatibility (EMC)
stated in the product specifications. These requirements and
limits provide reasonable protection against harmful interference
8 | ni.com | NI 9220 Getting Started Guide

Other manuals for National Instruments 9220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the National Instruments 9220 and is the answer not in the manual?

National Instruments 9220 Specifications

General IconGeneral
BrandNational Instruments
Model9220
CategoryI/O Systems
LanguageEnglish

Related product manuals